On Throttle is your number 1 motorcycling news site for Kiwi motorcyclists. Featuring new model news, reviews and general features, On Throttle's aim is to be an asset to the Kiwi biker at large.
Search This Blog
#RoadTest: Yamaha Bolt XVS950 R-Spec
Sometimes, when a manufacturer tries to go for a certain look, they
miss the mark by quite a margin. Luckily for me, I found when jumping
aboard the new Yamaha Bolt XVS950 that the nail was well and truly hit
on the head when it came to the factory bobber.
For those not in the know, a bobber is a motorcycle with a 'bobbed'
rear fender, extra-low slung seat and minimalistic styling. The Bolt
R-Spec, as tested, nails that description.
The minimalistic
nature of the Bolt R-Spec means that when you look down between the firm
but comfortable saddle and the 12L fuel tank you see the backbone of
the bike and the huge DOHC cylinder head of the 942cc engine.
Riding
the bike I wasn't quite sure where to position my knees. With a seat
height of only 690mm and comparatively high bars the result is a
menacing, slightly hunched riding position which made me feel like I was
riding straight out of "Sons of Anarchy".
The footpegs are typical of Japanese bikes and are centre set
so that you have the choice of riding either with your knees pointing
outwards, or resting them against that rear cylinder and the airbox.
After finding cornering more difficult, I chose the latter.
Much
to my surprise though, the Bolt R-Spec handles corners much better than I
had anticipated. The ultra low Bolt R-Spec makes no qualms about
scraping the foot pegs along the tarmac when you carry too much lean
angle - a common occurrence as you adjust to riding the Bolt. which at
first you seem to do quite frequently as you adjust riding styles to the
Bolt. The classic shaped fuel tank holds a total of 12-litres.
While
scraping the pegs was hilariously fun at times, it was actually
incredibly easy to carry a quick pace through tight corners without
touching down. I simply followed the same mantra as Porsche drivers -
that is 'Slow in, fast out' - by slowing down and then giving the 942cc
V-Twin a fistful of throttle on exit.
Weighing in at only 247kg
and, thanks to its low design, having a low center of gravity really
makes the Bolt R-Spec feel nimble for a cruiser. Additionally, with the
frame being so bare bones and narrow it is the first cruiser I've ridden
that I felt comfortable splitting lanes on. Take that, Auckland
traffic!
The engine itself is a beautiful V-Twin, that, despite
being manufactured in Japan, wouldn't seem out of place in a factory the
other side of the Pacific Ocean.
The engine itself is a
beautifully characterful V-Twin that wouldn't seem out of place on
something made on the opposite side of the Pacific Ocean to the Japanese
built Yamaha. At low rpm it shakes and pulses in a pleasing and
slightly menacing way.
At high rpm it can get a little bit vibey
but it never gets to the point where it becomes uncomfortable like other
V-Twins can. It does, however, affect the performance of the mirrors
which at most engine speeds blur out the detail of what you're looking
at.Although, considering that the point of mirrors is to check for
obstacles and traffic behind you, you can still see more than enough to
make safe lane changes. The pegs on the Bolt R-Spec have a tendency to touch down if you approach corners with too much lean angle.
Strangely
enough, the Bolt comes with a 5-speed gearbox, breaking from the
movement towards the universal use of a 6-speed. While the gear ratios
are fine for the purpose I did try finding a sixth gear a few times
while cruising on the motorway and the engine wasn't particularly happy
with my efforts to plod along at 50kph in top. Flicking through the
gears is a rewarding experience as you ride the torque curve of the
engine and punch your way forward.
My only real gripe with the
entire bike was the minimalist dash. Whilst in keeping with the bike's
unadulterated design and displaying only the essentials - such as speed
and the typical warning lights for fuel, hi-beams and oil - I found
that, when it rained, the digital speed readout became tricky to read. I
suspect this is because it wasn't dark enough to activate the gauge's
backlight which, in darker riding conditions, lit up the speedo nicely.
Personally, I like to have a tachometer too just for the added safety of
being able to see what the engine is doing.
The R-Spec has the
same beautiful finish I've come to expect from Yamaha's bikes. The seat
was a gorgeous almost suede item that felt so good I thought it was a
crime for me to be riding the bike in the rain. Thankfully Yamaha build
quality is such that it's never an issue and the bike. The rear lighting on the Bolt R-Spec complements the lines of the bike nicely.
As
usual Yamaha offer a full range of accessories for the Bolt R-Spec
including screens, luggage and even a ready-to-ride bagger version
available straight from the showroom floor.
It’s 2003, and crazy uncle Chrysler had what seemed like a fantastic idea, but it really wasn’t… By Mat Fiat and Chrysler were made for each other. Fiat possessed oodles of Italian heritage and passion, while Chrysler was the Gerry Brownlee of American automotive companies. The combination of the two was always going to create a noisy company that isn’t afraid to throw its weight around and let you know about it. These days it seems a month doesn’t go by with out some kooky new idea from “out-there” FCA CEO Sergio Marchionne making the rounds. But wind back the clock to the turn of the century and we can see Chrysler was already pretty out-there . And here’s why; they thought the Dodge Tomahawk was a good idea. For those who aren’t in the know, the Dodge Tomahawk was what turn of the century Americans , well , Americans in general , have always thoug ht was e...
Watch the 3-year ownership review on Youtube! I've owned a set of Maxxis' Bravo AT771 tyres for 3 years now, so I thought I'd share my thoughts on them. Firstly, I didn't buy these tyres after doing any research on them. Truth be told, I'd never even heard of Maxxis before buying these! But with the stipulation that I wanted a set of All Terrain tyres for my Forester in 215/65R16, and that I didn't want to pay over $1500 for them. I ended up paying $1000 fitted and balanced. I took a punt on the 'Mackies' as I've started to call them, and I've got to be honest, I've been pretty happy with them. Sure, they don't look as cool as other All Terrain models out there, but they've worn well and haven't given me any headaches in the 3 years I've had them. The Good Stuff The AT771s have proven to be a really good match for the Subaru in the sand, which is primarily where they've been used apart from highw...
With the introduction of the Learner Approved Motorcycles Scheme (LAMS) in 2012, new riders have far more choice in bikes than ever before. But has that extra variety and choice come at the cost of incredibly fun and thrifty, smaller capacity bikes? I’m not sure about the statistics, but in my own anecdotal view, it has. While I’ve noticed more people in my social circle taking up riding, not one has started with a sub 250cc motorcycle, even when their commuting needs don’t require the power and torque of a mid-sized bike. As a result, I’ve come to the conclusion that small capacity commuters are seriously underrated in terms of fun and ability. Jumping on the Aprilia ETX-150 for the first time I, like many, made a judgement about how the little Aprilia would ride based solely on the bike’s capacity. That 150 printed on the side cowling, in my mind, meant ‘no fun, gutless, and boring’. How wrong I was… The first thing you notice with the ETX-150 is not the size of the engine b...
Comments
Post a Comment